|
List of Publications (Proceeding) |
|
|
Year 2003 | No | Name | Title | Conference | | 1 | Mohd Lair, Noor Ajian, Nabi Baksh, Mohamed Shariff, Mohd. Shaharoun, Awaluddin | A Comparison of JIT with Conventional Inventory Strategies in a Supply Chain | The 19th International Conference on CAD/CAM Robotics and Factories of the Future on 22-24 July 2003, Kuala Lumpur. Vol 2; 779-785 |
Year 2004 | No | Name | Title | Conference | | 1 | A.P. Puvanasvaran, M. R. Osman | TQM Practice In ISO 9000 Certified Manufacturing Company: A Case Study In NSEM | Proceedings of the International conference of Quality Control Circle (Managing Quality in the New Global Economy)), 13-15 December 2004, Bangkok, Thailand, pp. A17-1, Published by The Association of QC Headquarters of Thailand. | | 2 | Mohd Lair, Noor Ajian, Nabi Baksh, Mohamed Shariff, Mohd. Shaharoun, Awaluddin, Ayob, Md Razali | The Effects of Transportation variance and Batch Sizes on the Performance of A Supply Chain | Proceedings of 2004 IEEE International Engineering Management Conference. 18-21 October 2004, Singapore | | 3 | Mohd Lair, Noor Ajian, Ayob, Md Razali, Ebrahim, Zuhriah | Implementation of ISO 9001:2000 at Faculty of Manufacturing Engineering Laboratory, Kolej Universiti Teknikal Kebangsaan Malaysia | Proceedings of International Convention on Quality Control Circle 2004. 13-15 December 2004, Bangkok. Vol 3;B20-2-B20-8 |
Year 2005 | No | Name | Title | Conference | | 1 | J.M. Juoi, M.I. Ojovan and W.E. Lee, | Development of Glass Composite Materials for Radioactive Waste Immobilisation, | Proc. ICEM’05, Glasgow, Scotland, ICEM05-1069, ASME | | 2 | Mohd Razali Muhamad and Wan Hasrulnizzam Wan Mahmood, | Productivity Improvement Through motion and time study | Proceeding: Seminar Kebangssan Komputeran Industri (iComp). Putrajaya | | 3 | Mohd Razali Muhamad and Wan Hasrulnizzam Wan Mahmood | Industrial Application of E-Manufacturing | Proceeding: National Conference on Management of Technology and Technology Entrepreneurship (MOTTE 2005). Johor | | 4 | Muzalna Mohd Jusoh, Adam Baharum | Application of Operations Research Model in Industry: Transportation Model | Simposium Kebangsaan Sains dan Matematik ke XIII | | 5 | A.P. Puvanasvaran, M.H.M.A. Megat | A review of Product Lifecycle Management in Industry | Proceeding of the 21st International Conference on CAD/CAM, Robotics and Factories of the Future CARS & FOF 2005, 17-20 July 2005, Krakow, Poland, pp. Product Development (B1). | | 6 | A.P. Puvanasvaran, G.Sanachi, M.H.M.A. Megat | Back Grind and Back Metal yield improvement in Integrated circuit Industry | Proceedings of the 3rd International conference on Manufacturing Research ICMR 2005 (Advances in Manufacturing Technology and Management) ) , 6-8 September 2005, Cranfield University, United Kingdom, ISBN 1-861941-22-6, pp. Manufacturing technology 1(A1). | | 7 | Mohd Lair, Noor Ajian, Luong, Lee, Marian, Romeo, Lee, Sang-Heon | Supply Chain Management Strategic Planning: A review | International Conference of Operational and Supply Chain Management, Bali 2005 | | 8 | Lok, Y.Y. and N. Amin | Steady Boundary Layer Flow of a Micropolar Fluid Near a Stagnation Point with Uniform Suction | The Proceedings of Annual Fundamental Science Seminar 2005 | | 9 | Thoguluva Raghavan Vijayaram | Application of squeeze casting technology to process fibre reinforced metal matrix composites | Comment 2005 Poland – Gliwice worldwide congress on materials and manufacturing engineering technology, 16th -19th May 2005 | | 10 | Thoguluva Raghavan Vijayaram | Quality control aspects and prospects to reduce rework and rejection in metallurgical industries | Comment 2005 Poland – Gliwice worldwide congress on materials and manufacturing engineering technology, 16th -19th May 2005 | | 11 | Thoguluva Raghavan Vijayaram | Quantification of mechanical properties and characterization of fracture surfaces on the as cast quartz particulate reinforced aluminium 11% silicon alloy matrix composites | The ICCE 12 Spain International conference proceedings, 2005 |
Year 2006 | No | Name | Title | Conference | | 1 | Saifudin Hafiz Yahaya and Jamaludin Md. Ali. | An alternative approach in transition curve between two circles. | National Conference of Design and Concurrent Engineering. | | 2 | Isa Halim, Abdul Rahman Omar, Raemy Md Zein. | Ergonomic Workstation Design of Metal Stamping Process to Improve Occupational Health in Malaysian Small and Medium Industries (SMIs). | Proceeding of International Symposium on Past, Present and Future Ergonomics, Occupational Safety and Health, Bali, Indonesia. | | 3 | Isa Halim, Abdul Rahman Omar, Raemy Md Zein. | Ergonomic Intervention for Metal Stamping Process to Improve Occupational Health in Malaysian Small and Medium Industries (SMIs). | Proceeding of International Conference on Technology and Operations Management 2006, Institut Teknologi Bandung, Indonesia. ISBN 979-15590-0-7. | | 4 | A.P. Puvanasvaran, M.H.M.A. Megat | A Framework to develop Tools and Techniques requirements methodology for implementing Lean Manufacturing | Proceedings of the 1st National Seminar on Science and it’s application in Industry, SSASI 2006 , 14-15 February 2006, KUTKM, Melaka, pp. D107-D114 | | 5 | A.P. Puvanasvaran, Muhamad, M.R, M.H.M.A. Megat,Tang S.H, A.M.S. Hamouda | A Framework to develop Tools and Techniques requirements methodology towards sustainability change | Proceedings of the 1st International conference & 7th AUN/SEED-Net FIELDWISE SEMINAR on Manufacturing and Material Processing , 14-15 March 2006, University Malaya, Kuala Lumpur, pp. 526-530. | | 6 | A.P. Puvanasvaran, Muhamad, M.R, M.H.M.A. Megat,Tang S.H, A.M.S. Hamouda | Development Of Lean Process Management System To Create Problem Solving Capability Among Employees | Proceedings of ICOMAST2006, International Conference on Manufacturing Science and Technology , August 28-30, 2006, Multimedia University Melaka, Malaysia, 14-15 March 2006, ISBN no. 983-42051-1-2, paper ID 565, pp.537-540. | | 7 | Mohd Lair, Noor Ajian, Luong, Lee, Marian, Romeo | Supply Chain Scheduling: Current Research Structure and Future Direction | Proceedings of the International Conference on Technology Management 2006, December 2006, Putrajaya, Malaysia | | 8 | Mohd Lair, Noor Ajian, Luong, Lee, Marian, Romeo | Supply Chain Scheduling: Exploration on Existing Performance Measures and Techniques | Proceedings of the International Conference on Technology Management 2006, December 2006, Putrajaya, Malaysia | | 9 | Bong Cheng SiongChong Kuan Eng | TQM Framework as a continuous learning model : A Case Study in a multinational company | The 8th International Conference on Modern Industrial Training 24-27 October 2006, Hong Kong | | 10 | Z. Jamaludin, H. Van Brussel, J. Swevers | Tracking Performances of Cascade and Sliding Mode Controllers with Application to a XY Milling Table | Proc. on Int. Conference on Noise and Vibration Engineering, Leuven, Belgium | | 11 | Z. Jamaludin, H. Van Brussel, J. Swevers | Comparison of Classical Cascade and Sliding Mode Control of a X-Y Feed Table of a High-Speed Machine Tools | Proc. of Int. Conf. on Manufacturing Science and Technology-ICOMAST, August 28-30, Malacca | | 12 | Z. Jamaludin, H. Van Brussel, J. Swevers | Comparison of Classical Cascade and Sliding Mode Control for a X-Y Feed Table of a High-Speed Machine Tools | Book of Abstracts - 25th Benelux Meeting on System and Control, March 15-18, Heeze, The Netherlands | | 13 | Ahmad Rasdan Ismail, Syamimi Shamsuddin and Azmi Hassan | The Accuracy Analysis Of Industrial Robot under Loaded Conditions and Various Distances | The International Conference On Man – Machine Systems (ICoMMS2006) | | 14 | N. I. S. Hussein, I. R. Pashby, and D. G. McCartney | Laser and arc weld method for direct metal deposition of Waspaloy – the study of microstructures and mechanical properties | ICOMAST (International Conference on Manufacturing Science and Technology), Melaka, Malaysia | | 15 | M.A. Kamely, M.Y. Noordin, M.J. Junasri | Experimental Investigation of Multilayer Coating Performance on CBN Cutting Tools When Turning of Hardened AISI D2 Cold Work Tool Steel | Proceedings of Conference On Manufacturing & Electronic Technology, Universiti Teknologi Malaysia, 14th – 15th Jan 2006, 145-150. | | 16 | M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan | Performance of Coated Ceramic Cutting Tools When Machining Hardened Steel, | 5th International Material Technology Conference & Exhibition, Kuala Lumpur. | | 17 | M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan | An Experimental Investigation of Coated Ceramic Cutting Tools When Hard Turning of Hardened AISI D2 Cold Work Tool Steel | Proceedings of 1st Regional Postgraduate Conference On Engineering and Science, Johor Bahru | | 18 | Lok, Y.Y., Amin, N. and Pop, I | Stagnation Point Flow Impinging Obliquely on a Flat Plate in a Porous Medium | Proceedings of 3ICAPM ( 3rd International Conference on Applications of Porous Media) | | 19 | Lok, Y.Y., Khoo, C.F., Tee, B.T. and Amin, N. | Mathematical Modeling of Stagnation Point Flow Induced by Accelerating Motion in Mircopolar fluid | Proceedings of the National seminar on Science and Its Applications in Industry (SSASI 2006) | | 20 | M. Mohd. Razali, B. Esmar, P.S. Sivarao, A.B. Mohd. Hadzley, A.R.Md. Nizam, I. Ismawati | PROPERTIES OF PVD TIALN COATINGS: A SURVEY | Proceeding of ICOMAST2006 International Conference on Manufacturing Science and Technology August 28-30, 2006, Melaka, Malaysia | | 21 | Thoguluva Raghavan Vijayaram | Casting metallurgy of tungsten carbide and aluminium silicate particulate reinforced LM6 alloy matrix hybrid composites | AMPT 2006 International conference Proceedings, MFVII8 371, Jul 30 – Aug 3, 2006, Las Vegas, Nevada, USA |
Year 2007 | No | Name | Title | Conference | | 1 | J.M Juoi and M. I. Ojovan, | Characterisation and Durability of Glass Composite Wasteforms Immobilising Spent Clinoptilolite, | Proc. WM’07, February 25-March 1, Tucson, AZ. | | 2 | M. I. Ojovan, J. M. Juoi and W. E. Lee | Glass Composite Materials for Nuclear Waste Immobilisation | ICG, July 1- 6, Strasbourg, France . | | 3 | J. Abd. Razak, M.A., Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya | Effects of Very Low wt.% Addition of Untreated-MWCNTs-PP Matrix Polymer Nanocomposites to the Mechanical and Thermal Properties | World Engineering Congress. 5-9 August 2007. Penang. | | 4 | J. Abd. Razak, M.A., Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya | Effects of Stearic Acid Addition to the Tensile Properties of Low Filler Loading untreated-MWCNTs-Polypropylene (PP) Nanocomposites | VIIth National Symposium on Polymeric Materials. 26-27 November 2007. Kuala Lumpur. | | 5 | J. Abd. Razak, M.A., Mohd Salleh, N.A. Ibrahim, A. Fakhru’l Razi & A.R. Suraya | The Influences of Melt Compounding Parameters to the Tensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites | 21st Symposium of Malaysian Chemical Engineers. 12-14 December 2007. UPM Serdang. | | 6 | Taufik, T.S. Beh, Shajahan b.Maidin | Design and Development of LED Bending Machine Fixture | World Engineering Congress 2007ISBN 978-983-43571-0-8 | | 7 | Taufik, Shajahan Maidin | Design of Sheet Metal Part using Design for Manufacture | Conference on Applications and Design in Mechanical Engineering ISBN: 978-983-42358-3-3 | | 8 | Taufik, Shajahan Maidin, Sivarao | Design Rules Optimization in Designing of Sheet Metal Part | REACH 07ISBN: 978-983-2948-24-7. | | 9 | Sivarao, Taufik | Design and Development of an Automobile Brake Lining Monitoring System | International Conference on Engineering & ICT, ISBN: 978-983-2948-22-3 | | 10 | Sivarao, Rahim, Taufik, Ammar | Comparative Quality Investigation of Rolled and Flat Carbon Steel Plates in Drilling | International Conference on Engineering & ICT, ISBN: 978-983-2948-22-3 | | 11 | Saifudin Hafiz Yahaya and Jamaludin Md. Ali. | A piecewise C1 rational Bézier cubic like interpolation in visualizing a scientific data. | 2nd Regional Conference on Ecological and Environmental Modeling. | | 12 | Saifudin Hafiz Yahaya and Jamaludin Md. Ali. | C-shaped Bézier-like transition curves of two circles. | Simposium Kebangsaan Sains Matematik ke-XV. | | 13 | Mohd Razali Mohamad, Esmar Budi, Saifudin Hafiz Yahaya and Md. Nizam Abd Rahman. | Modeling of the substrate bias effect in reactive sputtering. | International Conference on Engineering and ICT. | | 14 | I., Halim, A. R., Omar, M. H., Maslan. | Assessment of Thermal Comfort Measurement in Working Environment of Malaysian Manufacturing Industry | Proceeding of AEESEAP Regional Symposium on Engineering Education 2007, University of Malaya, Kuala Lumpur. ISBN 978-983-42035-3-5. | | 15 | Isa Halim, Adi Saptari, Seri Rahayu Kamat, Wan Hasrul Wan Mahmood. | Assessment of Workstation Design for Safe Working Posture at Plug Assembly Line. | Proceeding of International Conference on Engineering and ICT (ICEI 2007), Volume 1, pp. 183 – 190. ISBN 9-789832-948223. | | 16 | Adi Saptari, Seri Rahayu Kamat, Wan Hasrul Wan Mahmood, Isa Halim. | Optimum Workspace Design in a Plug Assembly Line | Proceeding of International Conference on Engineering and ICT (ICEI 2007), Volume 1, pp. 155 – 162. ISBN 9-789832-948223. | | 17 | Isa Halim, Adi Saptari, Seri Rahayu, Rohana Abdullah, Nor Akramin. | Measurement of Thermal Comfort at Working Environment in Manufacturing Industry | Proceeding of International Conference on Ergonomics 2007 (ICE 2007), pp. 207 – 212. ISBN 978-983-2085-91-1. | | 18 | Isa Halim, Adi Saptari, Seri Rahayu Kamat, Rohana Abdullah, Nor Akramin Mohamad” | Measurement of Thermal Comfort in Workplace Using Direct Technical Method: A Case Study in Manufacturing Industry” | International Conference of Ergonomic | | 19 | Seri Rahayu Kamat, Adi Saptari | “A Study Of Human Pinching/Griping Strength For the purpose of Hand tools Design” | International conference of Ergonomic | | 20 | Isa Halim, Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood | “Working Posture Assessment on A plug Assembly Line” | International Conference on Engineering and ICT | | 21 | Adi Saptari, Zuhriah Ebrahim | “A Study of Flicker Fusion Threshold for Malaysian Population” | International Conference of Ergonomic | | 22 | Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim | “Optimum Workspace Design in A Plug Assembly line | International Conference on Engineering and ICT | | 23 | Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim | “A Plug Assembly Line: An Assessment of Workstation Design and Working Posture | Journal of Biomechanics, Volume 40, Supplement 2 | | 24 | Rohana Abdullah, Adi Saptari, Isa Halim, Seri Rahayu Kamat | ”Capacity Characterization and Productivity Improvement Study Utilizing Simulation” | The Malaysian Research Group, International Conference. | | 25 | Wan Hasrulnizzam Wan Mahmood, Mohd Razali Muhamad, Mohd Irman Ramli | Industrial Application of Value Stream Mapping in Developing Best Practices For Productivity Improvement | Proceeding: World Engineering Congress 2007. Penang | | 26 | Mohd Irman Ramli, Mohd Hadzley Abu Bakar, Wan Hasrulnizzam Wan Mahmood, Mohamad Razif Baharudin | Analysis The Performance Evaluation Between Oil Based Coolant And Bio-Degradable Based Coolant On Cutting Surface In Turning Operation | Proceeding: World Engineering Congress 2007. Penang | | 27 | A.P. Puvanasvaran, Muhamad, M.R, M.H.M.A. Megat,Tang S.H, A.M.S. Hamouda | People Development System to Enhance Problem Solving Capabilities in Lean Process Management | Proceedings of World Engineering Congress, 2007, International Conference on Manufacturing Engineering , August 28-30, 2007, Penang, Malaysia, ISBN 978 - 983 - 43571 - 0 - 8 ©2007 FEIIC, pp.416-422. | | 28 | A.P. Puvanasvaran, Rohana Abdullah, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda | Lean Process Management as a Company Strategy to be a Cost Competitive: A Case Study in a Lean Aerospace Company | Proceedings of International Conference on Enginering and ICT (ICEI 2007) , November 27-28, 2007, Melaka, Malaysia, ISBN 978 - 983 - 2948 - 22 - 3 ©2007 Universiti Teknikal Malaysia Melaka , pp.27-31. | | 29 | A.P. Puvanasvaran, B.H. Tan, M.H.M.A. Megat, Tang S.H, Muhamad, M.R, A.M.S. Hamouda | Degree Of Leanness And Managerial Commitment In An Aerospace Company | Proceedings of International Conference on Enginering and ICT (ICEI 2007) , November 27-28, 2007, Melaka, Malaysia, ISBN 978 - 983 - 2948 - 22 - 3 ©2007 Universiti Teknikal Malaysia Melaka , pp.27-31. | | 30 | Mohd Lair, Noor Ajian, Luong, Lee, Marian, Romeo | Centralised Supply Chain Scheduling | Proceedings of the 5th International Conference on Supply Chain Management and Information Systems 2007, December 2007, Melbourne, Australia | | 31 | Bong Cheng SiongChong Kuan Eng | Managing Work in Progress in Production Control | World Engineering Congress 2007,7-9 August 2007, Penang | | 32 | T.Zahari, R. Nur Aidawaty, A.Shariman, A.R. Muhammad Arfauz | Development of Motion Control User Interface for an XY Table | Proceeding ICEI 2007 | | 33 | Mohd Irman b. Ramli | Performance Analysis of Cutting Fluid during Milling Operation: Study on Effect of Milling Work Surface | ICEI 2007,Melaka, organized by UTeM | | 34 | Mohd Irman b. Ramli | Analyze the Performance Evaluation of Coolants in Turning Operation: Study on Effect of Cutting Surface | WEC 2007, Penang, organized by UPM | | 35 | Wan Hasrulnizam b. Wan Mahmood,Mohd Irman b. Ramli | Industrial Application of Value Stream Mapping in Developing Best Practices for Productivity Improvement | WEC 2007, Penang, organized by UPM | | 36 | N. I. S. Hussein, D. G. McCartney, I. R. Pashby, and J. I. Segal | Heat flow and structural development during direct metal deposition of Waspaloy wire using a high power diode laser | ICALEO (The International Congress on Applications of Lasers & Electro-Optics), Orlando, USA | | 37 | N. I. S. Hussein, D. G. McCartney, and I. R. Pashby | Direct metal deposition of superalloy using wire feed: a comparison of laser and arc-based processes | ICRM (International Conference on Responsive Manufacturing), Nottingham, UK | | 38 | I. R. Pashby, G. Bi, J. Segal, and N. I. S. Hussein | Deposition of Nickel base Waspaloy via High Power Lasers | LIM (Lasers in Manufacturing), Munich, Germany | | 39 | Liew Pay Jun and Mohd Razali bin Muhamad | A study of EDM machining parameters on SKD 11 tool steel using DOE | National Metallurgical Conference 2007 | | 40 | Lok, Y.Y., Amin, N., Pop, I. and Ingham, D.B. | Unsteady Boundary Layer Flow Induced by Accelerating Motion near a Forward Stagnation point in a Micropolar Fluid | Proceedings of the 5th International Conference on Computational Heat and Mass Transfer | | 41 | M.Mohd. Razali, B. Esmar, A.R.Md. Nizam, | Surface finish of AISI D2 steel in dry turning with TiAlN-coated WC insert | Proceeding of Malaysia National Metallurgical Conference (NMC 2007), 26th & 27th November 2007,Johor Bahru, Malaysia | | 42 | M.Mohd.Razali, B. Esmar, Y.Saifudin Hafiz, A.R. Md. Nizam | Modeling of the Substrate Bias Effect in Reactive Sputtering, | ) Proceeding of International Conference on Engineering and ICT, 27-28 November 2007, Melaka, Malaysia | | 43 | M.Mohd.Razali, B. Esmar, A.R. Md. Nizam | Characterization of Surface Finish in Turning of AISI D2 Steel With TiAlN-coated WC Insert | Proceeding of International Conference on Engineering and ICT, 27-28 November 2007, Melaka, Malaysia | | 44 | Mohd Shukor Bin Salleh, Mohd Irman Ramli | Performance analysis of cutting fluid during milling operation : Study on effect of milling work | ICEI 2007, Melaka,organized by UTeM | | 45 | S.Sulaiman, Thoguluva Raghavan Vijayaram, R.Samin, MMHM.Ahmad | Squeeze casting technique for processing light metals, alloys, and metal matrix composites | World Engineering Congress 2007, Pulau Pinang, 5-9 August 2007, Malaysia | | 46 | Thoguluva Raghavan Vijayaram | Foundry metallurgy of LM6 alloy matrix hybrid composite castings processed in permanent metallic copper mold | National Metallurgical Conference, NMC 2007, Organized by UTM, Skudai, Puteri Pacific Hotel, November 2007, Johor Bahru, Malaysia | | 47 | Thoguluva Raghavan Vijayaram, B. Ramesh Bapu | Production and Characterization of 12% Titanium Carbide Particulate Reinforced Aluminum-11.8 % Silicon Alloy Matrix Composite Castings Processed by Vortex Method - Liquid Metallurgy Route for Aerospace Applications | ECHDEM 2007, International Conference on “Emerging Challenges in Design and Manufacturing Technologies”, Proceedings, organized by Sathyabama University, Chennai, India & Combat Vehicles Research and Development Establishment, India, 28 to 30 November 2007 |
Year 2008 | No | Name | Title | Conference | | 1 | J. Abd. Razak, M.A. Mohd Salleh, N.A., Ibrahim, A. Fakhru’l Razi & A.R. Suraya | PP Filled MWCNTs Composites: The Effects of Lower Percentages of Filler Addition to the Mechanical and Morphological Properties. | International Conference on Composites and Nanomaterials (iC2MS). 5-7 August 2008. Melaka. | | 2 | Taufik, Tan Soon Lam, Tajul Ariffin Abdullah | Design Improvement of Wheel Spacer | National Conference on Design & Concurrent Engineering 2008ISBN: 978-983-2948-54-4 | | 3 | Taufik, T.C. Kuah, Tajul Ariffin Abdullah | Design Improvement of Turbocharger using CFD | National Conference on Design & Concurrent Engineering 2008ISBN: 978-983-2948-54-4 | | 4 | Shajahan B. Maidin and Hazman B. Hasib and Taufik | Curriculum Structure of Degree Programme Offered by The Department of Manufacturing Design , Universiti Teknikal Malaysia Melaka | ICEPEE’08 – International Conference on Engineering Professional Ethics and Education | | 5 | Taufik1, Tajul Ariffin Abdullah2 | Design Improvement of Turbocharger using Genetic Algorithm | 2nd International Conference on Science & Technology (ICSTIE), 12-13 December 2008, ISBN: 978-983-42204-2-6 | | 6 | Taufik, Shajahan b. Main, and Sivarao a/l Subramonian | Study on Design Optimization in Designing of Sheet Metal Part | MUCEET (Malaysian Technical Universities Conference on Engineering and TechnologyISBN: 978-967-5080-59-3 | | 7 | Taufik, and Tajul Ariffin Abdullah | Use of CFD for the Turbocharger Design | REACH 08ISBN: 978-983-2948-24-7. | | 8 | Taufik, Tan Soon Lam and Tajul Ariffin. | Design Imrovement of Wheel Spacer. | National Conference of Design and Concurrent Engineering (DECON). | | 9 | Taufik, T.C. Kuah and Tajul Ariffin. | Design Improvement of Turbocharger Using CFD. | National Conference of Design and Concurrent Engineering (DECON). | | 10 | Saifudin Hafiz Yahaya, Muhammad Kamil Sued and Muhammad Hafidz Fazli Md. Fauadi. | Development of gear curve using an S-shaped transition curve. | National Conference of Design and Concurrent Engineering. | | 11 | Saifudin Hafiz Yahaya, Jamaludin Md. Ali and Mohd Rizuan Baharon. | Vase design using transition curve application. | Simposium Kebangsaan Sains Matematik ke- 16 | | 12 | Saifudin Hafiz Yahaya, Shajahan Maidin and Muhammad Hafidz Fazli Fauadi. | Spur gear tooth design using spirals curve application. | Malaysian Technical Universities Conference on Engineering and Technology. | | 13 | Muhammad Hafidz Fazli Md. Fauadi and Saifudin Hafiz Yahaya. | Modeling and simulation of PUMA industrial robot for automotive – related assembly process. | Fifth International Conference on Computer Graphics, Imaging and Visualization. | | 14 | Muhammad Hafidz Fazli Fauadi, Zulkeflee Abdullah and Saifudin Hafiz Yahaya. | Generic process planning requirements for plastic mould manufacturing. | Malaysian Technical Universities Conference on Engineering and Technology. | | 15 | Rohana Abdullah, Adi Saptari, Nor Akramin Mohamad, Isa Halim, Effendi Mohamad. | Simulation Modelling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line. | Proceeding of Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2008), Volume 2, pp. 520 – 525. ISBN 978-983-42358-4-0. | | 16 | Adi Saptari, Isa Halim, Seri Rahayu Kamat, Nor Akramin Mohamad, | Productivity Analysis at a Small and Medium Enterprises (SMEs) focusing on Work Study, Line Balance and Ergonomics | Proceeding of International Conference on Mechanical & Manufacturing Engineering (ICME 2008), pp. 1 – 9. ISBN 97-98-2963-59-2. | | 17 | Radin Zaid Radin Umar, Nadia Ahmad, Isa Halim. | An Anthropometric Evaluation of Workstation Design: A Case Study in an Automotive Industry | Proceeding of National Conference on Design & Concurrent Engineering (DECON 2008), pp. 297 – 302. ISBN 9-789832-948544. | | 18 | Isa Halim, Rohana Abdullah, Stanley Yong Thau Foong. | Assessment of Thermal Comfort at Classroom Environment: Subjective Measurement vs. Direct Technical Measurement. | Proceeding of International Conference on Environment (ICENV 2008), pp. 1 – 8. ISBN 9-789833-986392. | | 19 | Adi Saptari, Effendi Mohamad, Loo Wei Khoing, 2008 | “A process Capability and Cost Appraisal for Quality Control Problems A Case Study at Candy Manufacturer” | National Conference on Design & Concurrent Engineerin. | | 20 | Adi Saptari, Nor Akramin Mohamad, Shee Chee Shen, 2008 | “An Analysis of Jig Design to Assembly Time In Plug Assembly Line Using Design of Experiment” | National Conference on Design & Concurrent Engineering | | 21 | Adi Saptari, Haeryip Sihombing, Mohd. Azlan Husin. | “Product Variation and Measurement Variation of Manufacturing Bolt Using Lathe Machine” | National Conference on Design & Concurrent Engineering 2008, 28th-29th October 2008 | | 22 | Adi Saptari, Shee Chee Shen, Abdul Rahman Mahmood, 2008 | “Optimal Design of Jig and Assembly Process in Plug Assembly Line” | 3rd Brunei International Conference, on Engineering and Technology | | 23 | Effendi Mohamad, Mohd Razali Muhamad, Rohana Abdullah and Adi Saptari | A study on The Development of Key Performance Indicators (KPIs) At Aerospace Manufacturing Company | Journal Advanced Manufacturing Technology | | 24 | Rohana Abdullah, Effendi Mohamad and Adi Saptari | Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility | KMICE, Langkawi | | 25 | Rohana Abdullah, Adi Saptari, Isa Halim, Seri Rahayu Kamat, Nor Akramin Mohamad | Productivity Analysis at a Small and Medium Enterprises (SMEs) focusing on Work Study, Line Balance and Ergonomics | International Conference Mechanical & Manufacturing Engineering (ICME'08) | | 26 | Rohana Abdullah, Adi Saptari, Isa Halim, Effendi Mohamad | Simulation Modelling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line | International Conference on Mechanical and Manufacturing Engineering (ICME) | | 27 | Nursafarizah Abd Aziz, Nor Ratna Masrom and Adi Saptari | “The Contribution of R&D Agencies in Exploring the Technology Transfer” | Asia Pacific Conference on Management of Technology and Technology Entrepreneurship | | 28 | Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim | “Analysis Workspace Design in Assembly line for Small Electric Industry” | Seminar Pencapaian Penyelidikan UTeM (REACH’07) | | 29 | Adi Saptari, and Zuhriah Ebrahim | “A Human Vision Sensitivity Analysis for Designing Better Human Machine Interface” | Seminar Pencapaian Penyelidikan UTeM (REACH’07) | | 30 | Nor Akramin Mohammad, Adi Saptari, Hazman Hasib | “An Attempt of Structuring Anthropometry Database Pilot Project of Malaysian Population for the Benefit of Industry” | Seminar Pencapaian Penyelidikan UTeM (REACH’07) | | 31 | Adi Saptari, and Zuhriah Ebrahim | “A Human Vision Sensitivity Analysis for Designing Better Human Machine Interface” | Malaysian Technical Universities Conference on Engineering and Technology | | 32 | Adi Saptari, Seri Rahayu Kamat, Wan Hasrulnizzam Wan Mahmood, Isa Halim | “Analysis Workspace Design in Assembly line for Small Electric Industry” | Seminar Pencapaian Penyelidikan UTeM (REACH’07) | | 33 | Wan Hasrulnizzam Wan Mahmood, Norhafiza Mohamed, | The Effectiveness of Electronic Scheduling Template: Case Study on Composite Based Product’s Company | Proceeding: International Conference on Science and: Application s in Industry and Education ( ICSTIE 2008), Penang. | | 34 | Wan Hasrulnizzam Wan Mahmood, Ab Rahman Mahmood, Ilyana Abdullah, | Autonomous Maintenance Program For Job Base In Technical University | Proceeding: international Conference on the roles of the humanities and social sciences in engineering 2008 (ICOHSE 2008), KL | | 35 | Wan Hasrulnizzam Wan Mahmood, Zuhriah Ebrahim and Effendi Mohamad | Development of an TPM Office for Lecturer’s Room” | Proceeding: National Management Conference 2008 (NAMAC), K. Terengganu. ISBN: 978-983-9842-32-6 | | 36 | Wan Hasrulnizzam Wan Mahmood, | Lean Manufacturing: A Survey | Proceeding: Asia Pacific Conference on Management of Technology and Technology Entrepreneurship (APCMOTTE 2008), Melaka. | | 37 | Wan Hasrulnizzam Wan Mahmood and Abdul Majid Ali. | Autonomous Maintenance for milling Machine | Proceeding: National Conference on design & Concurrent Engineering (DECON 2008),. Melaka. ISBN: 978-983-2948-54-4. | | 38 | Wan Hasrulnizzam Wan Mahmood, | Industrial Types of manufacturing Complexity | Proceeding: National Seminar on Engineering and Technopreneurship (NSET 2008), Kuala Lumpur | | 39 | Wan Hasrulnizzam Wan Mahmood and Ilyana Abdullah | Fuguai mapping: The useful Method for problem solving | Proceeding: Seminar Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, ISBN: 978-983-2948-33-9. Melaka | | 40 | Wan Hasrulnizzam Wan Mahmood, Effendi Mohamad and Abd Rahman Abdullah, | Enhancement Of An Effective Training In Manufacturing Company | Proceeding: Knowledge Management International Conference (KMICe, 08), , Langkawi, Kedah. | | 41 | Wan Hasrulnizzam Wan Mahmood, | Industrial Application Tools and Techniques in Lean Manufacturing and Total Quality Management | Proceeding: Knowledge Management International Conference (KMICe, 08), , Langkawi, Kedah. | | 42 | Wan Hasrulnizzam Wan Mahmood and Mohd Razali Muhamad, | Industrial Application Of Lean Manufacturing | Proceeding: National Seminar on Science, technology and social science (STSS), Kuantan, Pahang. ISBN: 978-983-2607-17-5. | | 43 | A.P. Puvanasvaran, M.H.M.A. Megat, Tang S.H, M.R, Rosnah, Muhamad, M.R, A.M.S. Hamouda | People Development System To Enhance Problem Solving Capabilities In Implementing Lean Process Management: A Case Study In Aerospace Company | Proceedings of 6th International Conference on Manufacturing Research (ICMR 2008) , September 9-11, 2008, University Brunel, West London, ISBN 978-1-902316-60-4, Vol. 1., pp.253-272. | | 44 | A.P. Puvanasvaran, M.H.M.A. Megat, Tang S.H, M.R, Rosnah, Muhamad, M.R, A.M.S. Hamouda | People Development System To Enhance Problem Solving Capabilities In Implementing Lean Process Management: A Case Study In Aerospace Company | Proceedings Symposium on Engineering and Technology SET2008, December15-16, 2008, Kuching, Sarawak, Malaysia, ISBN 978-983-43571-3-9, Vol 1, pp.44-66 | | 45 | Effendi Mohamad, Mohd Razali Muhamamad and Rohana Abdullah, | Lean Manufacturing Implementation: A study on The Development of Key Performance Indicators (KPIs) At Aerospace Manufacturing Company | International Conference on Mechanical and Manufacturing Engineering (ICME) 21st -23rd May, 2008. ISBN: 9789832963592) | | 46 | Effendi Mohamad, Rohana Abdullah, Wan Hasrulnizzam Wan Mahmood , | “Communication Gap Analysis at Aersopace Manufacturing Company”, | Seminar Kebangsaan Kemahiran Insaniah & Kesejahteraan Social (SKIKS) , August 2008 (ISBN: 978-983-2948-33-9). | | 47 | Effendi Mohamad, Rohana Abdullah, Wan Hasrulnizzam Wan Mahmood , | “The Level of Achievement of Lean Manufacturing Implementation Status Before and After The Development of KPI’s at an Aerospace Manufacturing Company” | International Conference on The Roles of the Humanities and Social Sciences in Engineering 2008 (ICoSHE 2008), 5th -6th December2008. | | 48 | Chong Kuan Eng, Mohamed K. Omar, Nooh Abu Bakar | Solving Assembly Line Balancing Problem using Genetic Algorithm with Heuristics-Treated Initial Population | The 2008 International Conference of Manufacturing Engineering and Engineering Management
London, U.K., 2-4 July 2008 | | 49 | Lokman Abdullah | Automated Color Sorting Robot For Recycling Application | International Conference on Mechanical Engineering (ICME 08) | | 50 | Lokman Abdullah | Design and Fabrication of a Pen Holder using Automated Color Sorting Robot | National Conference on Design and Concurrent Engineering. (DECON 08) | | 51 | Z. Jamaludin, H. Van Brussel, J. Swevers | Design of a Disturbance Observer and Model-Based Friction Feedforward to Compensate Quadrant Glitches | The 9th International Conference on Motion and Vibration Control - MOVIC, Munich, Sept. 15-18 | | 52 | Z. Jamaludin, H. Van Brussel, J. Swevers | Quadrant Glitch Compensation using Friction Model-based Feedforward and an Inverse-Model-Based Disturbance Observer | Proc. of the 10th International Workshop on Advanced Motion Control, Trento, Italy, pp. 212-217. | | 53 | Ahmad Rasdan Ismail, Azmi Hassan, Syamimi Shamsuddin, Mohd Zaki Nuawi, Shahrum Abdullah, Hairunnisa Mohamad Ibrahim | The Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances | 8th WSEAS International Conference On Robotics, Control And Manufacturing Technology | | 54 | Syamimi binti Shamsuddin, Mohamad Firdhaus bin Mohamad Lajis | Performance Analysis of a Six-axis COMAU Robot | DECON 08 | | 55 | Mohd Hisham Nordin, Shariman Abdullah | Multiple Parts Orienting Method for Automated Assembly Process | International Conference on Mechanical and Manufacturing Engineering, (ICME 2008) | | 56 | Nur Aidawaty Rafan, Umar Abdul Hannan | Design of PLC Controller for An Automated Parking System | Proceeding DECON 2008 | | 57 | Adnan Rachmat Anom Besari, Md.Dan bin Md.Palil, Ruzaidi bin Zamri, Anton Satria Prabuwono | A Review of Novel Sensing Techniques for AutomaticPolishing Robot System | DECON | | 58 | Khairul Anuar A.Rahman, Anton Satria Prabuwono, Ruzaidi Zamri, A.Syukor Md.Jaya | Development of Intelligent Visual Inspection System | DECON | | 59 | Saifudin Hafiz Yahaya, Mohammad Kamil Sued, Muhammad Hafidz Fazli Md. Fauadi | Development of Gear Curve Using an S-shape Transition Curve | National Conference on Design and Concurrent Engineering | | 60 | M.A. Kamely, M.Y. Noordin, V.C. Venkatesh, D. Kurniawan | The Effect of Cutting Speed and Coating Materials on Chip Morphology when Hard Turning AISI D2 Cold Work Tool Steel (60 HRC), | Proceedings of Conference On Manufacturing & Electronic Technology, Universiti Teknologi Malaysia | | 61 | Khairul Anuar A.Rahman | Development of Intelligent Assembly Inspection System | DECON | | 62 | Khairul Anuar A.Rahman | Design and Development of an automated whiteboard . | SET (Symposium of Engineering Technology) | | 63 | Liew Pay Jun and Mohd Razali bin Muhamad | Analysis of the influence of EDM parameters on surface roughness and surface hardness | 3rd Brunei International Conference On Engineering And Technology ( Bicet) | | 64 | Liew Pay Jun and Mohd Razali bin Muhamad | Effect of machining parameters in EDM of SKD 11 tool steel | Symposium on Engineering &Technology 2008 | | 65 | Masilla Kamalrudin, Sharmini Mohan, Liew Pay Jun and Rosmiza Wahida Abdullah | The mold cost estimation calculator for plastic injection mould manufacturing | 3rd International Symposium on Information Technology | | 66 | Liew Pay Jun ,Masilla Kamalrudin, Sharmini Mohan, Rosmiza Wahida Abdullah | Design consideration in machining and assembly process for plastic injection mould | National Conference on design and concurrent engineering 2008 | | 67 | M.Mohd.Razali, B. Esmar, A.R. Md. Nizam | Investigation of chip characteristics of pvd tialn-coated WC insert in dry turning of AISI D2 | Proceeding of Malaysian Metallurgical Conference (MMC 2008), 3-4 December 2008, Bangi, Malaysia | | 68 | Thoguluva Raghavan Vijayaram | Manufacturing, Mechanical Properties and Microstructural Studies on Quartz particulate reinforced Aluminium-11.8% Silicon alloy matrix composite castings processed in a permanent metallic GCI mold by vortex mixing method | WFC 2008: World Foundry Congress 2008, 8 and 9th Feb 2008, India | | 69 | Thoguluva Raghavan Vijayaram | Evaluation on the entrepreneurial skills of engineering students | ICEPEE 2008 International Conference, Kuala Lumpur, Malaysia, May 2008 organized by IEEE, Malaysia | | 70 | Ryspek Usubamatov, Thoguluva Raghavan Vijayaram, A.Usubamatov | Reliability engineering on feeding systems in automatic machines of high production capacity | National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008 | | 71 | Ryspek Usubamatov , Thoguluva Raghavan Vijayaram, F. Hamid, A.Usubamatov | Tolerances of linear, angular sized parts and feeders for reliable assembly processes in precision engineering | National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008 | | 72 | Thoguluva Raghavan Vijayaram | Design and manufacturing of Fluka-Graphite Particulate Reinforced LM6 alloy Composites | National Conference on Design and Concurrent Engineering 2008, DECON 2008, UTeM, Melaka, Malaysia, October 2008 | | 73 | Thoguluva Raghavan Vijayaram | Technical Review on Rubber History, Technology of Rubber Processing and its Applications in Engineering | ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008 | | 74 | Sivarao, Thoguluva Raghavan Vijayaram, Intan Sharhida, Zurina Shamsudin | Creep characteristics of calcium carbonate particulated polyethylene matrix | ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008 | | 75 | Sivarao, Thoguluva Raghavan Vijayaram, Sivasankaran Nair | Automatic cutting fluid control in milling: Towards improved tribology and economical manufacturing practice | ICSTIE 2008 International Conference, Universiti Teknologi Mara, Pulau Pinang, Malaysia, December 2008 |
Year 2009 | No | Name | Title | Conference | | 1 | J.M.Juoi and M.I. Ojovan | Glass Composite Materials for Nuclear Waste Immobilisation | International Nuclear Conference, Kuala Lumpur | | 2 | Taufik, and Tajul Ariffin Abdullah | Genetic Algorithm for Design Improvement of Turbocharger | MUCEET (Malaysian Technical Universities Conference on Engineering and TechnologyISBN: 978-967-5080-59-3 | | 3 | Taufik, and T.A. Abdullah | Simulation on Cast Metal Matrix Composite by Investment Casting | 4th International Conference on Recent Advances in Materials, Minerals & Environment & 2nd Asian Symposium on Materials & Processing ISBN: 978-963-3986-57-6 | | 4 | Tajul Ariffin Abdullah and Siti Lydia Rahim. | An Introduction of Rapid Manufcturing Technology Implementation in Malaysian Automotive Industry. | Malaysian Technical Universities Conference on Engineering and Technology (MUCCET ). | | 5 | Sivarao L. M.S. Kassim, Taufik and Tajul Ariffin Abdullah | Double Layer Control System Based on Engine RPM: A Regression Model Development & Practical Application | Malaysian Technical Universities Conference on Engineering and Technology (MUCCET ). | | 6 | Sivarao L. M.S. Kassim, Taufik and Tajul Ariffin Abdullah | Fully Autoamted Transmission ssytem in Automobile Application: A Feasible Investigation | Malaysian Technical Universities Conference on Engineering and Technology (MUCCET ) | | 7 | Sivarao L. M.S. Kassim, Taufik and Tajul Ariffin Abdullah | Preliminary Investigation of Developing Most Economical Cooling system Utilizing Underground Time Delay Characteristics | Malaysian Technical Universities Conference on Engineering and Technology (MUCCET ) | | 8 | Saifudin Hafiz Yahaya, Jamaludin Md Ali and Wahyono Sapto Widodo. | Spur gear design using an S-shaped transition curve with finite element analysis. | 5th Asian Mathematical Conference. | | 9 | Wan Hasrulnizzam Wan Mahmood and Nurul Ain Mat Tahar | Supply Chain Management: After Business Process Re-Engineering | Proceeding: World academy of Science, Engineering And Technology. Vol. 41. May 2009. ISSN: 2070-3740. Tokyo, Japan | | 10 | S.R.Kamat, A.Yoxall, M,J,Carre and J.Rowson | A Preliminary Study into the Human Perception of Hand Pain for Activities Common in Daily Life | Nordic Ergonomics Society 41st Annual Conference Globalized Ergonomics | | 11 | Mohamed, M.S.S. | Usability evaluation of a Malaysian university website. In RJ Marley,AR Kumar, BF Ware, TE Lockhart (Eds.), Dallas, Texas | Proceedings of the XXIst Annual International Occupational Ergonomics and Safety Conference (pp 18-22). | | 12 | Ahmad Yusairi B.H., Badrul Hisyam N., Mohd Hanafi S., Mohd Riyadh Ssolihin A.R. | Authentication model using multiple sensors input | Proc. of the 2009 Inter. Conf. on Signal Acquisition & Processing (ICSAP 2009) | | 13 | Ahmad Yusairi B.H., Noor Azuan A.O, Wan Abu Bakar W.A. | Formalizing array of foot’s bones through a graph | Second International Conference and Workshops on Basic Science and Applied Sciences & Regional Annual Fundamental Science Seminar 2009 (ICORAFSS 2009) | | 14 | Ahmad Yusairi B.H.,Mohd Irman R., Abdul Rahim S., Mohd Syafik J. | Development of the Zlatanov-Gosselin Robotic System | Proc. of the Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 2009) | | 15 | Ahmad Yusairi B.H., Noor Azuan A.O., Wan Abu Bakar W.A. | Review on prosthetic feet | Proc. of the International Conference on Advances in Mechanical Engineering (ICAME 2009) | | 16 | Ahmad Yusairi B.H., Teng Guat Theng, Khairol Anuar R. | Lead screw apparatus for manufacturing engineering control laboratory | Proc. of the International Conference on Advances in Mechanical Engineering (ICAME 2009) | | 17 | Lokman Abdullah | Performance Analysis in Design and Fabrication of a Pen Holder using Automated Color Sorting Robot | Malaysian Technical Universities Conference on Engineering and Technology (MUCEET 09) | | 18 | Lokman Abdullah | Simulation of An Automated Tool Changer using Automation Studio. | International Conference on Advances in Mechanical Engineering (ICAME 09) | | 19 | Lokman Abdullah | Simulation of an Automated Manufacturing Process using Automation Studio | International Conference on Applications and Design in Mechanical Engineering (ICADME 09) | | 20 | Lokman Abdullah | Feasibility study of Radio Frequency Identification Method (RFID) in manufacturing environment | International Conference on Software Engineering and Computer Systems (ICSECS 09) | | 21 | Lokman Abdullah | Design and Analysis of Robot Manufacturing Systems for Manufacturing Industries | International Conference on Engineering and Technology (ICET 09) | | 22 | Lokman Abdullah | Radio Frequency Identification Method (RFID) based Inspection System for assembly operation | International Conference on Robotics, Vision, Signal Processing and Power Applications (ROVISP 09) | | 23 | Syamimi binti Shamsuddin, Mohamad Firdhaus bin Mohamad Lajis | Accuracy and repeatability analysis of industrial robot under loaded conditions and various distance | Malaysian Technical Universities Conference and Exhibition on Engineering and Technology (MUCEET) | | 24 | Tham Wai Foong, Nur Aidawaty Rafan, Silah Hayati | Automated Guided Cart | Proceeding ICAME 2009 | | 25 | Tan Sia Peng, Nur Aidawaty Rafan. Nurazua Mohd Yusop | An Improvement on Positioning Technique on Current X-Y Table | Proceeding ICAME 2009 | | 26 | Yogan, A.Syukor Md.Jaya, Ruzaidi bin Zamri | Line Balancing System for Vacuum Assembly Line | International Conference on Software Engineering and Computer System (ICSECS 2009) | | 27 | Adnan Rachmat Anom Besari , Ruzaidi Zamri , Ahmad Yusaeri , Md.Dan Md.Palil , Anton Satria Prabuwono | Automatic Ablution Machine using Vision Sensor | IEEE Symposium on Industrial Electronics and Applications (ISIEA 2009) | | 28 | Mohd Fairuz Dimin, Mohd Haizal bin Mohd Husin | Characterization of accelerated thermal degradation of LDPE using Fourier transform infra red spectroscopy | Malaysian Technical Universities Conference on Engineering and Technology, UMP, Pahang | | 29 | Mohd Fairuz Dimin, Mohamad Nizam bin Ayof, Mohd Zaki Sharifuldin, Izzad Jauhari Sarlan, Na'ain Shari | Conditioning monitoring of stamping blanking oil using Fourier transform infra red spectroscopy | Malaysian Technical Universities Conference on Engineering and Technology, UMP, Pahang | | 30 | Mohammad Kamil Sued, Samir Mekid | Dimensional Inspection of Small and Mesoscale Components using Laser Scanner | International Conference on Advances in Mechanical Engineering | | 31 | Ahmad Yusairi b. Bani Hashim(principal)Mohd Irman b. Ramli(co-principal) | Development of the Zlatanov-Gosselin Robotic System | MUCEET 2009, Kuantan, organized by UMP | | 32 | S. Sivarao, M.S.Kassim, S.Sivasan, N.I.S. Hussein, A.R.M. Warikh, A.S.Rahim, A. Tajul, Taufik | Preliminary investigation of developing most economical cooling system utilizing time delay characteristic or the ground | MUCEET (Malaysian Technical Universities Conference on Engineering and Technology), Kuantan, Malaysia | | 33 | Nor Mohamad Sulong, Liew Pay Jun and Mohd Razali bin Muhamad | Analysis the influence of EDM parameters on material removal rate and electrode wear of copperberyllium alloy using copper electrode | International Conference On Advances In Mechanical Engineering 2009-ICAME 2009 | | 34 | Nor Mohamad Sulong, Liew Pay Jun and Mohd Razali bin Muhamad | Analysis the influence of EDM parameters on material removal rate and electrode wear of copper beryllium alloy using graphite electrode ( Accepted for oral presentation but the conference will be held on 26 - 29 October 2009 | Advances in Materials and Processing Technologies(AMPT) | | 35 | Liew Pay Jun and Chang Kok Wai | Optimization of Machining Parameters on Laser Cutting. ( Accepted for oral presentation but the conference will be held on 11-13 November 2009) | 3rd International Conference of Asian Society for Precision Engineering and nanotechnology | | 36 | Mohd Shukor Bin Salleh(Principle) | Properties Determination and Micro structural Evaluation of Graphite Particulate Reinforced Aluminium Metal Matrix Composites Processed by Powder Metallurgy | INCAMA 2009,India, organized by Kalasalingam University of India | | 37 | Thoguluva Raghavan Vijayaram | Metallurgical processing, testing and microstructural characterization of graphite particulate reinforced aluminium-silicon alloy matrix composite castings, | 57th Indian Foundry Congress and IFEX 2009, 13, 14 and 15th February 2009, Science City, ITC Sonar, Milon Mela, Kolkata, India. | | 38 | Thoguluva Raghavan Vijayaram | Casting, static properties determination and metallography of titanium carbide particulate reinforced LM6 alloy matrix composites processed in copper mold | 57th Indian Foundry Congress and IFEX 2009, 13, 14 and 15th February 2009, Science City, ITC Sonar, Milon Mela, Kolkata, India. | | 39 | Thoguluva Raghavan Vijayaram and Shamsuddin Sulaiman | Manufacturing, Mechanical Testing, Characterization, and Fracture Surface Analysis of Tungsten Carbide and Aluminium Silicate Particulate Reinforced Aluminium-11.8% Silicon Alloy Matrix Hybrid Composite Castings | AMPT 2009, November 2009, IIUM, KL, Malaysia, Paper ID: 12. | | 40 | Thoguluva Raghavan Vijayaram and Shamsuddin Sulaiman | Effect of Pressure on Mechanical Properties and Microstructure during the Solidification Processing of LM6 Alloy | AMPT 2009, November 2009, IIUM, KL, Malaysia, Paper ID: 13. | | 41 | M.Sayuti, S.Suraya, S.Sulaiman, Thoguluva Raghavan Vijayaram, M.K.H.Arifin, B.T.H.T.Baharudin | Thermal Investigation of Aluminium-11.8% Silicon (LM6) reinforced SiO2-particles | AMPT 2009, October 2009, IIUM, Kuala Lumpur, Malaysia, Paper ID: 892, Published in the Avances in Materials and Processing Technologies, 2009 International Conference Proceedings. | | 42 | Mohd Shukor B. Salleh, Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman | Powder metallurgical processing of graphite particulate aluminium MMC | AMPT 2009, November 2009, IIUM, KL, Malaysia, | | 43 | Mohd Hisham Nordin and Shariman Abdullah | Intelligent Robotics Parts Feeder using Radio Frequency Identification (RFID) Technology | International Advanced of Technology Congress (ATCi), PWTC, Malaysia. November 3-5, 2009. |
Year 2010 | No | Name | Title | Conference | | 1 | Thoguluva Raghavan Vijayaram | Foundry Modernization and Technology Upgradation, and Development in Metal Casting Manufacturing Manufacturing Industries | The 2nd International Conference on Engineering and ICT, 18-20 February, 2010Paper ID: FKM-73, under Mechanical Engineering, | | 2 | Thoguluva Raghavan Vijayaram | Application of Industrial Mathematics | RCAEM-1 CONFERENCE PROCEEDINGS, IST REGIONAL CONFERENCE ON APPLIED AND ENGINEERING MATHEMATICS, ORGANIZED BY INSTITUT MATEMATIK KEJURUTERAAN, UNIMAP PERLIS, UKM BANGI, AND USM PENANG MALAYSIA, 2-3 JUNE 2010 | | | | | |
|
|
Last Updated ( Friday, 11 June 2010 )
|
|
Research